JAK-200TC collector makes tree clearing efficient
The JAK-200TC is an agile and lightweight tree shear that cuts, prunes, and loads trees. Equipped with a build-in collector, 200TC can grab several trees at the same time, which allows the tree shear to be used again immediately without unnecessary stops.
This 200TC model is made for harvesting energy wood, clean up field sides and roadside areas, and different kinds of environmental works. The even bigger area is cleared quickly. Smaller trees are possible to take so many than cutting capacity to give up. Just cut the first one and open and after that take the next one and next one etc. after the cutting capacity is full, just put the whole bush to the loading area or fall down direct to the trailer.
Before cutting, a standing tree can be delimbed by lifting with a crane. Delimbing blades cut branches off. After delimbing jaws take tight hold of the trunk and the hydraulic cutting blades cut the tree neatly and efficiently. After cutting the top of the tree stay still vertical position if wanted and it is easy to move to the loading area or fell tree direct to the trailer.
Base machines: small harvesters, small forwarders, example Alstor, Kinetic, Usewood, Logbullet, etc, forest trailers with under 6,5m (21,3 ft) crane and small excavators 1,5 – 3t (3306 – 6613 lbs).
JAK-200TC Tree shear specifications
- Weight: 150 kg (330 lbs)
- Cutting diameter: 200 mm/200 bar (7,8 in/2 900 psi)
- hardwood like oak, beech, etc. about 25% less
- Pressure booster: No
- Recommended oil flow: 20-50 l/min (5,2-13,2 gal/min)
- Recommended working pressure: 170 – 200 bar (2 465 – 2 900 psi)
- Maximum working pressure: 210 bar (3 0145 psi)
- Collector / Multi-tree handling: Yes
- Recommended under 6,5-meter (21,3 ft) cranes (15-40 kNm)
- Connecting has to be free-hanging with rotator
- Warranty: 1 year
JAK-200TC Tree shear features
➔ No need for extra hydraulic or electric
➔ No hoses or electrical wires to restrict grapple rotator
➔ Easy and fast connecting
➔ Cutting, loading, delimbing the tree
➔ Collector boosts productivity
➔ Guillotine and tilt-unit is possible to lock in the loading position
➔ Also works as a loading grapple
➔ Made with Hardox steel
Watch the JAK-200TC Tree shear presentation video
This video demonstrates JAK-200TC in action. The JAK-200TC is an agile and lightweight tree shear that cuts, prunes, and loads trees. Equipped with a build-in collector, 200TC can grab several trees at the same time, which allows the tree shear to be used again immediately without unnecessary stops.
Want more information? Do not hesitate to contact us.
If you need more information about the JAK-200TC tree shear or would like to know your nearest JAK dealer, please feel free to contact us. You can also request a quote if you want to order the product directly from our factory.